Paint Pressure pot Tank, 10 Lt Manual Agitator FMT6054 CE Approved
10 LT Paint Pressure pot Tank also Spraygun complete FMT6054 on 4 swivel casters and fitted with a manual agitator. Complete with 7.5 metre dual hose and pressure feed spray gun CE Approved and built in a factory TUV regulated. This tank is ideal for painting large areas as the large tank will mean less refills.
It is great for painting paint, glues, grease and a wide range of other coatings due to the versatility of this pressure tank with the FMT6079 gun and the twin air and fluid hoses FMT8905.
It is capable of accepting a 5lt tin directly, and will act as a paint inner within the tank hence increasing its versatility.
Fitted with an air regulator and gauge .
- Maximum Tank Pressure 80PSI/5.5 BAR
- Tank Working Pressure 60PSI/4.1 BAR
- Air Inlet/Outlet 1/4″ BSP Fluid Outlet 3/8″ BSP
- Weight 15.3 kg Tank Capacity 10ltr.
HVLP Pressure feed spray gun
HVLP pressure feed spray gun is designed to connect through dual hose air and paint hose to the 10 LT Paint Pressure pot Tank also Spraygun complete FMT6054 and will give perfect performance and reliability.
To obtain the best results it is important that you prepare the surface to be sprayed and the paint will need thinning correctly because this will give the correct viscosity before you start work.
Always ensure that the surface to be sprayed is free from dust , dirt, grease and foreign bodies because this will give a cleaner job. Always mask the areas around the areas to be sprayed using DAEVI QUICK MASK masking film foil, Masking Tape
The paint to be sprayed should be suited to the task and compatable with the spray gun. There should be no lumps or other particles. Make sure that you have a properly working strainer. Many substances can be sprayed with this equipment it is important that you check with your paint supplier before purchase.
You should also check the job before painting for signs of silicone contamination.
- Air consumption – 12 – 15 cfm
- Working pressure – 3-6 bar/43-80psi
- Maximum pressure – 6.2 bar/80 psi
- Weight – 610 grams
- Fluid inlet – 3/8″
- Air Inlet – 1/4″