Acrylic primer Aerosol Tempo Filler Shades Ts2 light grey spray paint 400 ml

Compare

Acrylic primer Aerosol Tempo Filler Shades is a Fast drying high solids acrylic Using the recommended ground coat colour as a primer has major cost saving advantages as the top coat will then normally cover in 2 coats

Email

£8.98

SKU: 202.TS2.114 Categories: ,

Description

Acrylic primer Aerosol Tempo Filler Shades

Acrylic primer Aerosol Tempo Filler Shades is a Fast drying high solids acrylic , chromate free primer filler. Exceptional build and has good anti-corrosive properties. Key features is it superb non-sag property and it is completely isocyanate free, easy to flat, super fast recoatable and very low sinkage.

106.026 Acrylic primer Tempo Filler Ts1 white spray paint
106.032 Acrylic primer Tempo Filler Ts4 Grey spray paint
106.025 Acrylic primer Tempo Filler Ts7 Black spray paint
202.TS1.114 Acrylic primer Aerosol Tempo Filler Shades Ts1 white spray paint 400 ml
202.TS2.114 Acrylic primer Aerosol Tempo Filler Shades Ts2 light grey spray paint 400 ml
202.TS3.114 Acrylic primer Aerosol Tempo Filler Shades Ts3 grey spray paint 400 ml
202.TS4.114 Acrylic primer Aerosol Tempo Filler Shades Ts4 mid grey spray paint 400 ml
202.TS5.114 Acrylic primer Aerosol Tempo Filler Shades Ts5 Dark grey spray paint 400 ml
202.TS6.114 Acrylic primer Aerosol Tempo Filler Shades Ts6 charcoal black spray paint 400 ml
202.TS7.114 Acrylic primer Aerosol Tempo Filler Shades Ts7 black spray paint 400 ml

Product Additive
107.022 tempo-active accelerator thinner

Coverage
A coverage of 8-9 sq/mtr per ltr. Of base paint.

Flash point
below 21°c (Highly Flammable)

Application Substrates
Tempo-Filler is recommended to be applied over ;
– Bare steel
– Aluminium
– Galvanised metal
– new panel
– Sound and fully cured old finishes
– Polyester fillers and stoppers after flatting cellulose

Surface preparation
Degreaser with Quick wipe degreaser.
Dry sand with p180-p240 grade paper.
Wet sand with p400-p600 grade paper.
Air dry synthetic need to be isolated with blok isolator sealer first.

Mixing Instructions
As a high solid primer
5 parts tempo-filler -1 parts tempo-aktiv
As a primer surfacer
4 parts tempo-filler -1 parts tempo-aktiv
As a surfacer
3 parts tempo-filler -1 parts tempo-aktiv

Spraying viscosity
29-30 secs Din cup 4 at 20°c
Spraygun fluid tip and working pressure
tip pressure
Gravity feed Spraygun 1.5mm 3-4 bar
(30-60 psi)
Suction feed Spraygun 1.8mm 3-4 bar
(30-60 psi)

Application process

A high build primer
Apply 3 full coats allowing no flash -off time between coats .
Further single coats can be applied to give greater build for filling deeper sanding marks.
One single coat will give approximately 50 microns build per coat.

As a primer surfacer
Apply 2 full coats allowing no flash -off time between coats .
Further single coats can be applied to give greater build for filling deeper sanding marks.
One single coat will give approximately 20 microns build per coat.

Drying
at 20 Degrees C
Dust free 5 – 12 minutes
Wet flattable 5 – 15 minutes
Recoatable 5 – 15 minutes
Drying time depends on temperature and film depth applied .

Flatting
Wet flat with p600 – p800 paper
dry sand with p320-p400 stearate paper

Storage
12 months for unopened cans.
Ambient temperature for application is above 10°c low humidity /dry conditions.

Recoatability
With nitrocellulose stoppers (not with polyester type fillers and stoppers) tempo-filler can be over coated with all standard Refinishing systems.

Cleaning solvent
Mirror low cost thinner

Points of Note
Health and safety information

Work only in good ventilation and/good local extraction. Avoid breathing vapours or spray mist. Wear suitable respiratory equipment.

Tempo-filler is highly-flammable -No Smoking Or Naked Flame Should Be Allowed.
Contamination of clothing should be avoided.

Additional information

Weight 0.4 kg
Dimensions 70 x 70 x 200 mm