Mirrorfast 1k Thermoplastic air dry clearcoat (RFU) 1 Litre

Quick air drying thermal plastic acrylic enamel for automotive part repairs or repaints. Ready for use and pre-thinned for a quick easy application. Extremely fast flash-off and can be polished to a full gloss.

£18.62

Description

Mirrorfast 1k Thermoplastic air dry clearcoat (RFU) 1 Litre

Mirrorfast 1k Thermoplastic air dry clearcoat (ready for use) 1 Litre enamel for automotive part repairs or repaints ,Industrial work and exterior woodwork ,extremely fast flash-off and polish to a full gloss.

Colour

clear

Appearance

Full Gloss ,satin or matt available

Products

104.010 – Mirrorfast Ready mixed colours
104.011 – Mirrorfast candyapple toner.
104.012 – Mirrorfast fluorescent colours:
104.004 – Mirrorfast Acrylic Clear

Coverage

A coverage of 8-9m sq/mtr per ltr per coat Of base paint applied.

Flash point

below 21°c (Highly Flammable)

Application Substrates

Mirrorfast Acrylic Clear can be applied over sanded original finishes .
Mirrorfast colours, Mirrorbase Colours.

Surface preparation

Degrease with Quick wipe degreaser.
Dry sand with p320-p400 grade paper.
Wet sand with p800-p1000 grade paper.
Degrease with Quick wipe degreaser, as tech. info.

Mixing Instructions

Mirror fast clear is supplied Ready for use But in cold conditions and low temperature, and your Spraygun setup will depend on the us of thinner, a greater amount of thinner will enhance the sprayability ,flow and polish ability.
Use Mirrorfast thinner.

Spraying viscosity

12-15s Din cup 4 at 20°c (15-19s BSB4 cup)

Spraygun fluid tip and working pressure
tip pressure
Gravity feed Spraygun 1.5mm 2-4 bar
(30-60 psi)
Suction feed Spraygun 1.8mm 2-4 bar
(30-60 psi)

Application process

Spray single coats . Flash off times do vary depending on temperature, the type of thinners used and conditions of application, you must allow each coat to become touch dry before applying the following coat 3-4 coats this will give protection but further coats can be used.

Blending and fading out techniques:

Fade-outs are extremely easy with Mirrorfast ,Reduce pressure to (5-7psi), dissolve by fading pure RA Blending thinner over area to be Blended.

Fluorescent colours/ candy colours

The system comprises of 2 basecoats and clear finish.
First apply 3 full coats of Mirrorfast groundcoat brilliant white with full flash-off time between coats.
After 15mins flash-off time apply 3 full coats Fluorescent basecoat, or until correct opacity is achieved.
After 30mins flash-off times 3 coats of ready for use Mirrorfast clear can be applied.
For extra durability 2 coats of mirror crystal clear two pack acrylic lacquer can be applied, especially if petrol resistance is required i.e.: motor bike petrol tanks.

Candy apple

Candy apple toner is a translucent clear that shows metallic groundcoat through the paint film the desired effect is achieved by to use of coat or multiply coat
Apply mirrorbase groundcoat using 3 coats /after 30mins flash off and then further a candy apple toner is applied to achieve correct opacity and desired colour 1 or 2 coats is normally sufficient, but density is achieved if further coats are applied.
After 30mins flash-off times 3 coats of ready for use Mirrorfast clear can be applied.
For extra durability 2 coats of mirror crystal clear two pack acrylic lacquer can be applied therefore enhancing the petrol resistance i.e.: for motor bike petrol tanks etc.

Drying

Dust free 5 mins
Tack free 15 mins
Touch dry 30 mins

Recoatability.

Recoatable after correct flash-off times

Polishing

Areas with imperfections can have a light flatted with P1200 Wet or Dry and then finally polished when dry.

Storage

12 months for unopened cans.
Ambient temperature for application is above 10°c low humidity /dry conditions.

Cleaning solvent

Mirror low cost thinner

Additional information

Weight 1.1 kg
Dimensions 115 × 115 × 140 mm
Colour