2K Clearcoat matt Aerosol urethane lacquer varnish spray paint Boxed 12 x 400 ml

£74.90

2K Clearcoat matt Aerosol urethane lacquer varnish spray paint 400 ml isocyanate free use as a clear coating after basecoat application , used over solvent based or water based basecoat.

Email
Compare
SKU: 202.025.114-1 Categories: ,

Description

2K Clearcoat matt Aerosol urethane lacquer varnish spray paint 400 ml

2K Smart Mirrorclear Aerosol 400 ml MS 2k Clearcoat isocyanate free use as a clear coating after basecoat application , used over solvent based or water based basecoat.
A high quality quick drying 2k gloss clearcoat pre-activated supplied as a pack.
To be used as a topcoat clear in basecoat /clearcoat finishers.
Suitable for cars, commercial vehicles as well as for Industrial applications equipment.

Colour
Clear

Appearance
High Gloss

Products and Additives

2K Smart Mirrorclear Aerosol 400 ml can be used in conjunction with the following products to give a very fast and comprehensive product range.

Theoretical Coverage
A coverage of 6-9 m sq/Mt. per coat Of base paint if full coats are applied.

Flash point
Flash point below 32°c (Flammable)

Application Substrates
Mirrorclear MS can be applied over polyester basecoat as part of a basecoat/clearcoat system.
Suitable primers prior to basecoat application include:
Washfiller Etch -on steel or aluminium alloys
Tempo Filler shades
Mirrorcryl Hi-Fil (2k) Primer

Abraded original finishes with (p 1500) or Primer systems use ultra fine Fibral hand pad.

Surface preparation
Dry sand with p320-p400 freecut paper
Wet sand with p800-p1000 wet or dry paper.
Recoat primers when flash-off/drying times have been observed.

Application
1st COAT
Spray one single medium coat allowing 10 minutes flash off .
2nd COAT
Spray one full coat allowing 5 minutes flash before baking.

Drying

20°c metal temperature
Dust free Tack free Hard dry
every thinner 30 mins 1.5 hrs 16 hrs
Accelerator 25 mins 1.0 hrs 12hrs

40°c metal temperature
Dust free Tack free Hard dry
every thinner 15 mins 45mins 5 hrs
Accelerator 12 mins 40 mins 4.5 hrs

60°c metal temperature
Dust free Tack free Hard dry
every thinner 5 mins 10mins 35mins
Accelerator 4 mins 9 mins 25 mins Tempo-ex-act 2 mins 6 mins 15 mins

Recoatability.

Recoatable after drying times under hard dry ,if flatting is necessary when fully cured flat with p1000 and leave open as long as possible before recoating.

Storage
12 months for unopened cans.
Ambient temperature for application is above 10°c. low humidity /dry conditions.

Cleaning solvent
Mirror low cost thinner

Chemical Resistance
Weathering and chemical attack are outstanding with this product

Points of Note

This tech. info sheet only relates to the products supplied within this pack, failure to use this pack as a system may result in poor results.

Additional information

Weight 6 kg
Dimensions 270 × 200 × 250 mm