Acrylic Clearcoat clear laquer Aerosol spray paint 400 ml

£9.74

Acrylic Clearcoat clear laquer Aerosol spray paint 400 ml for automotive part repairs or repaints.
Extremely fast flash-off and can be polished to a full gloss.
Acrylic Clear lacquer with a glossy finish
400ml areosol with ellipitical nozzle for mor

Email
Compare
SKU: 202.013.114 Categories: ,

Description

Aerosol Acrylic Clearcoat 400 ml

Aerosol Acrylic Clearcoat 400 ml is a Quick air drying thermal plastic acrylic enamel for automotive part repairs or repaints.
Extremely fast flash-off and can be polished to a full gloss.
Acrylic Clear lacquer with a glossy finish Aerosol Acrylic Clearcoat 400 ml with elliptical nozzle for more control when spraying.
Each can is enough for 4 or 5 coats of a Telecaster sized body (depending on coat thickness) Aerosol produces a consistent fine spray.
No sanding in-between coats required. Just rub final coat with 1200 grit wet& dry, then polish with waterbased compound for a mirror shine.

Quick drying TPA acrylic Clearcoat enamel for automotive part repairs or repaints ,Industrial work and exterior woodwork ,extremely fast flash-off and polish to a full gloss.

  • Clear
  • Full Gloss ,satin or matt available
  • A coverage of 8-9m sq/mtr per ltr per coat Of base paint applied.
  • Flash point is below 21°c (Highly Flammable)
  • Mirrorfast Acrylic Clear can be applied over sanded original finishes Mirrorfast colours, Mirrorbase Colours.

Surface preparation

Degrease with Quick wipe degreaser.
Dry sand with p320-p400 grade paper.
Wet sand with p800-p1000 grade paper.
Degrease with Quick wipe degreaser, as tech. info.

Mixing Instructions

Mirror fast clear is supplied Ready for use But in cold conditions and low temperature, and your Spraygun setup will depend on the us of thinner, a greater amount of thinner will enhance the spray ability ,flow and polish ability.
Use Mirrorfast thinner.

Application process

Spray single coats . Flash off times will vary depending on temperature, the type of thinners used and conditions of application, please allow each coat to become touch dry before applying the following coat 3-4 coats will give protection but further coats can be used.

Blending and fading out techniques:

Fade-outs are extremely easy with Mirrorfast ,Reduce pressure to (5-7psi), dissolve by fading pure RA Blending thinner over area to be Blended.

Fluorescent colours/ candy colours

The system comprises of 2 basecoats and clear finish.
First apply 3 full coats of Mirrorfast groundcoat brilliant white with full flash-off time between coats.
After 15mins flash-off time apply 3 full coats Fluorescent basecoat, or until correct opacity is achieved.
After 30mins flash-off times 3 coats of ready for use Mirrorfast clear can be applied.
For extra durability 2 coats of mirror crystal clear two pack acrylic lacquer can be applied, especially if petrol resistance is required i.e.: motor bike petrol tanks.

Candy apple

Candy apple toner is a translucent clear that shows metallic groundcoat through ,desired effect is achieved by to use of coat or multiply coat
Apply Mirrorbase groundcoat 3 coats /after 30mins flash off apply candy apple toner to achieve correct opacity and desired colour 1 or 2 coats is normally sufficient, but density is achieved if further coats are applied.
After 30mins flash-off times 3 coats of ready for use Mirrorfast clear can be applied.
For extra durability 2 coats of mirror crystal clear two pack acrylic lacquer can be applied, especially if petrol resistance is required i.e.: motor bike petrol tanks.

Additional information

Weight 0.4 kg
Dimensions 70 × 70 × 200 mm