Alloy wheel Aerosol spray paint A1 Silver Sparkle Fine 400 ml
The Perfect Alloy Wheel Kit Range.
Alloy wheel Aerosol wicked wheels Spray Paint we provide the highest quality alloy wheel aerosol spray paint selection for the whole of the UK.
Our popular aerosol spray cans are available in a range of specialist metallic, alluminium, chrome, gold,steel colours of the most popular alloy wheel spray paint colours.
Specialised metallic pigments to give the best chrome effects.
Genuine 2K isocyanate pre-activated smart Clearcoat lacquer.
Brilliant gloss retention.
Very scratch resistant.
Fast drying alloy wheel aerosol spray paints.
Gives a spray gun finish every time.
Resists brake dust, cleaning chemicals, road salt etc.
Resistant to cracking and flaking
Simple to apply and quick drying
Avaiable in 400ml Aerosols
Aerosol Mirrorbase Polyester base coat clearcoat system
Mirror Wicked Wheels Mirrorbase should be used as part of refinishing systems and should be over coated with Mirrorclear clearcoat product before protection is achieved. Quick drying basecoat available in solid, metallic, pearl and special effect multi flip due to low opacity most colours will require a coloured groundcoat.
Mirror Wicked Wheels Mirrorbase basecoat aerosol is a quick drying basecoat for car and commercial vehicles consequently improving you throughput and efficiency. This product has been design to make the application of Metallics and Pearlcoat colours a simple process , due to the ease of application , Mirror Wicked Wheels Mirrorbase stops the problems associated with application of basecoat ,mottling of Metallics ,long drying times and Floating when lacquer is applied over basecoat are all things of the past. Mirrorbase should be used as part of refinishing systems and should be over coated with Mirrorclear Clearcoat product before protection is achieved. Mirror Wicked Wheels Aerosol basecoat available in solid, metallic, pearl and special effect multi flip.
Etch Primer Aerosol spray high build washfiller 400 ml
2K Clearcoat Aerosol urathane lacquer varnish spray paint 400 ml
2K Primer Aerosol Light Grey spray paint Smart Hi fil 400 ml
2K Primer Aerosol Mid Grey spray paint Smart Hi fil 400 ml
2K Primer Aerosol Dark Grey spray paint Smart Hi fil 400 ml
2K Primer Aerosol Buff spray paint Smart Hi fil 400 ml
All original finishes cleaned and sanded (not recommended on thermoplastic acrylic finishes).
Mirror hi-Fil 2k primer.
Mirror Washfiller etch.
Tempo filler shades
The entire panel or blending in areas have to be carefully prepared as follows (before basecoat application):
Clean with water and soap
Degreaser with mirror quick wipe degreaser.
Dry sand with p500 sunmight film disc finish with grey finishing pad.
Or Wet flat with p1000 wetordry.
Wipe dry with clean and dry cloth.
Tack off or Use Attract rag.
1) Apply 3 coat 10 mins between of washfiller etch on all bear metal areas becouse this will give a superb key for subsequent coats 3
– sand with p600 sunmight film disc before 2k smart hs primer application
2) Apply 2-3 coats 2K Smart Hifil Hs Primer 15 mins flash off between , leave to dry for 1 hr of bake in the oven for 30mins at 60oC .
Please prepare the primed surface carefully before the Mirror Wicked Wheels Mirrorbase basecoat application, fine scratches will show, use p1000 sunmight film disc before basecoat.
3)Apply Mirrorbase basecoat apply three coats allow to dry between coats then allow 30 minutes flash after the application of the last coat before applying Clearcoat.
4) Apply 2-3 coats 2K Smart Mirrorclear Aerosol allowing 10 mins flash off between coats.
Spray distance (cm): 15-20 cm
10 minutes between coats.
Recoatable with Mirrorclear 2k
30 minutes after last coat application.
After hard dry times of Mirrorclear 2k.
After the application of Mirrorclear 2k.the fully cured coating is resistant to short exposures to the following chemicals:
Sodium hydroxide 20% battery acid 15%
Sulphuric acid 25% toluene 20%
Hydrochloric acid 20% Xylene 20%
Phosphoric acid 20% glycol 20%
Ammonia 10% brake fluid 25%
Use mirror low cost thinner immediately after use.
6 8 m2 per ltr per coat at recommended dry film thickness, unactivated
Mirrorbase metallic 15-25 microns
Mirrorbase solid 35-45 microns
Please spray aerosol upside down before storing , this will keep the nozzle clear of paint coating.