Autoclear 2K Clear 2-1 537 7.5 Lt Kit
Autoclear 2K Clear 2-1 537 5Lt
Autoclear Hardener Std 537 2.5Lt (7.5 Ltr) Kit
High quality 2:1 Scratch Resistant clear coat with high build properties and fast drying, It has perfect adhesion and excellent flow. Easy for polishing after 30 minutes from baking.
Mix at a ratio 2:1 with 537 hardener.
BODY AUTO CLEAR 537 2:1 SR
High solid clear coat suitable for full body repairs or spot panel repairs Great gloss retaining Excellent mechanical and high chemical resistance Excellent physical properties Scratch resistant
Mix 2:1 with BODY AUTO CLEAR 537 HARDENER Thinner addition 0-5% BODY 740 ACRYLIC THINNER Oven force drying – 10 min /60-65°C panel temperature IR drying 8-10 min
distance: 60 -70 cm
Body 2K Autoemail acrylic paint Clean substrate using a soft cloth and BODY 770 ANTISIL NORMAL / BODY 771 ANTISIL FAST Make sure the surface is air dried rather than wiped dry Make sure you always use appropriate face protection and good ventilation.
2 passes»» Apply one hand, and after the 10 min flash off time apply the second full hand.
Surface Pretreatment / Cleaning of substrate
2:1 mix with BODY 537 AUTO HARDENER
Pot life: > 7h 23°C Addition 0-5% of
Use BODY 740 ACRYL THINNER
Ready to spray:
15 – 16s Cup 4/23°C DIN 53211@23°C
Compliant Spray gun 1.3 – 1.4 mm 3-4 bar inlet pressure 2x coats = 40 -50 micron HVLP 1.3 – 1.4mm 2 bar atomization pressure 2x coats = 40 -50 micron 10 min / 20-22°C Final flash off time Non force dry 2-3h /22-25°C
Short wave 8-10 min
distance: 60 -70 cm
Always wear protective equipment Follow the application instructions mentioned in this TDS
Flash Point: 24°C / 52°F
Specific Gravity: 0.950 g/cm3
Solid Content (No thinner):
49% Weight VOC (2001/42/EC)
This product is a special refinish product based on its ingredents and its properties. The maximum VOC content in this category is 840 g/L. The VOC content in the ready for use form of this product is 575 g/L. 2004/42/IIB(e)(840)575
8-9 m2 / l at 50micron dry film thickness
Cleaning of equipment:
Clean after final use with Body 740 ACRYL NORMAL
• Allow for additional time for combi spray booths to reach the desired temperature
• Application only with BODY AUTO CLEAR 537 HARDENER
• It can only be used by countries that do not adopt the VOC legislation
• Guaranteed shelf life of 24 months in unused original containers
2K paint systems tend to react with water, hence all the equipment used must be moisture free. Isocyanates may cause skin sensitization. More specifically, care should be taken when handling the material. Anyone with a history of histaminic conditions, or respiratory problems should consult the doctor first. For professional use only. The information displayed on this sheet has been carefully selected though a series of laboratory investigations. It is based on our best knowledge at the time of issue. The data is given for information purposes only. We are not liable for its correctness, accuracy and completeness. It is up to the user to check for newer updates or further information if needed for his intended purpose. The intellectual property of this product, trademarks and copyrights is protected. All rights reserved. The relevant Material Safety Data Sheet and warnings displayed on the label must be read carefully. We may modify and / or discontinue operation of all or portions of this information at any time in our sole discretion, without any notice and assume no responsibility to update the information. All rules set forth in this clause shall apply accordingly for any future changes and amendments.
Issue 1/2013, November 2013