Hi-Gloss Woodlaquer Yacht Varnish clear 1LT
£15.93
Hi gloss poly type yacht varnish is an advanced formula one pack synthetic enamel with fast drying properties, suitable for wood finishing, applied by brush.
This varnish is available in a classic high-gloss finish for exterior use and in pleasant eggshell finishes for galleys and interiors.
Description
Hi-Gloss Woodlaquer Yacht Varnish clear
Hi-Gloss Woodlaquer Yacht Varnish clear is an advanced formula beautiful silky smooth one pack synthetic enamel with fast drying properties, suitable for exterior marine wood finishing, applied by brush.
Professional high quality solvent-based varnish that provides superior, long lasting protection for exterior wood. The high build formula provides a durable water resistant smooth finish the alkyd resin used in Oval Hi-Gloss Woodlaquer Yacht Varnish clear is extremely flexible meaning it resists cracking and peeling by flexing with the movement in wood.
Pack Size
Clear Gloss, Clear Satin
Application
Surfaces should be clean, dry and free from wax, oil or grease. Unsound coatings should be removed while any imperfections made good. Sound varnish coatings should be rubbed down with sandpaper to give a smooth surface and to provide a key to ensure all dust is removed.
Stir well before and during use.Hi-Gloss Woodlaquer Yacht Varnish can be applied evenly by brush, synthetic short pile roller or spray. Allow 6 hours between coats. Lightly sand and remove all dust before the final coat.
Optimised for use in cool or moderate climates, Suitable for all internal and external woods, including oily timbers such as Teak and Iroko
Drying Time 6 hours
Re coat Time 6 hours
Number of Coats 2 or 3
Suitability Exterior Doors, Exterior Windows, Exterior Surfaces
Coverage 16m per coat/L
Advantages
1 Marine Polyurethane Finish – Gloss Clear and satin
2 first of all due to the Advanced UV technology in our longest-lasting one-part varnish it will look great for years.
3 Exceptional deep gloss and colour are retained over the lifetime of the coating because of the unique structure.
4 Sand between every other coat and leave 1 hour before further application
5 Traditional amber colour
6 Use without thinning in warm/higher temperature climates
Clean up and Maintenance
Remove as much product as possible from the brush before cleaning. Clean brushes with oval low cost thinner or white spirit.
Do not empty the product into drains or watercourses due to contamination problems.
Some local authorities have special facilities for disposing of waste coatings this is especially relevant if you have problems with disposal.
