Mirror Cellulose Sanding Sealer Clearcoat

A solvent based sanding sealer clear with low odour . Use as a topcoat finish  for Woodstain translucent dye Spectrum and woodwork availiable in semi gloss finishing topcoat , will give a quick easy application after using Woodstain translucent dye Spectrum.

£0.00

  • A solvent based sanding sealer clear with low odour . Use as a topcoat finish for Woodstain translucent dye Spectrum and woodwork available in semi gloss finishing topcoat , will give a quick easy application after using Woodstain translucent dye Spectrum.
    This product comes in a range of beautiful Gloss levels including Satin and Matt finishers.

Description

Mirror Cellulose Sanding Sealer Clearcoat

Solvent based Mirror Cellulose Sanding Sealer Clearcoat with low odour . Use as a topcoat finish for all woodand a a range of semi gloss finishing topcoat , will give a quick easy application on the  full range of Woodstain translucent dye Spectrum colours.
Sanding Sealer quickly prepares the surface of bare wood and MDF used for furniture and decorative items prior to wax finishing. It seals the surface so that less wax is needed and its special lubricants ease sanding you can also seal MDF with Botton polish .

Sanding Sealer quickly prepares the surface prior of bare wood and MDF prior to wax finishing decorative items. It will seal the surface so that less wax is needed and its special lubricants will ease sanding. For table tops, shelves and other surfaces that need a hard wearing finish, seal with Liberon Finishing Oil instead of Sanding Sealer and then finish with wax if required. On floors use Liberon Floor Sealer and then Floor Wax.

Performance:
– Ideal for sealing wood before waxing
– Suitable for use on all types of new or stripped furniture; including MDF
– Brush or cloth applied
– Ideal for use on turned woodwork

Preparation:
Ensure surfaces are bare, dry and free from dust. If you want to colour the wood apply Liberon Palette Wood Dye before the sealer.

Application:
Shake or mix well before use.

Normaly this product is spray applied it is ready thinned and is applied at 40-50 ib/sq inc , apply 2 – 3 coats with a 15 minute flashoff between each coat.

Brush on a thin coat of sealer, allow to dry for at least one hour and sand very thoroughly with 240 or 320 grit abrasive paper. Apply a second coat if required and resand after a minimum of one hour. Apply Wax polish using Ultra Fine (0000) Steel Wool

Additional information

Weight 5 kg
Dimensions 12 × 12 × 14 mm
Colour