Mirror Metal Conditioner And Rust Converter 1Lt
Is designed for the surface preparation of steel and aluminum containing metals. It improves at the same time the adhesion between substrates and topcoats.Inject into hidden cavities, prior to injecting a cavity rust proofing wax, on rusted steel and components, on moving parts, nuts, bolts, drive shafts, uj’s, leaf springs, railway hardware, radio masts, gas and oil field pipelines, on all exposed steel in aggressive environments. as a primer prior to using conventional paint coatings over rusty or badly pitted steel
Used as a Rust Converter -Passivating rust by conversion of the iron oxide to a neutral layer.
Used as a Metal Conditioner -is a special per-cleaner to condition metal and small rust imperfections prior to paint /primer application to open the metal pours .
Metal has a tendency to start to micro rust immediately after sanding .
Blend of solvents and acid cleaners.
Substrates to which this Product can be Applied
For use on bare metal.
Surfaces should be free of all loose dust and smooth, sanded with P80 grit Production paper, or Fib re discs.
Use Solvent proof gloves.
Used as a Rust Converter -Apply the product neat onto the area’s of rust normally by brush , when the rust has become dark gray wash of with water before further treatment with a suitable primer wash filler etch primer is ideal.
Used as a Metal Conditioner – wet a clean cloth and apply to the surface under treatment.Promptly thereafter wipe the surface dry with a dry cloth, do not allow the Metal Conditioner to dry on the surface, to remove contaminants effectively the surface must be wiped dry.
After this treatment the surface will be conditioned and can be painted with any suitable system.
Cleaning of Equipment
Dispose of waste clothes under the (coshh regulations)