Mirror Plaz-Tak For Difficult To Paint Plastics (Improves Adhesion) 1Lt

Description

Mirror Plaz-Tak For Difficult To Paint Plastics (Improves Adhesion) 1Lt
Special surface preparation wipe for very hard to paint plastic parts ,
This product has been made to slightly melt the surface of plastic such as Polyuethane and polypropylene to in prove the adhesion of subsequent coats for plastic coating Surface wipe for all plastic and plastic foam surfaces prior to painting to improve adhesion.
Description
A very strong solvent for cleaning Plastics will slightly melt surface of Plastic component to give a superior key.
Products
Blend of solvents
Substrates to which this Product can be Applied
Plastic ,OEM finishes and all sanded primers
Surface Preparation
Plastic Surfaces should be free of all loose dust and smooth.
Mixing Ratio
Ready for use.
Application process
Using the de greaser, wet a clean cloth and apply to the surface under treatment.
Promptly thereafter wipe the surface dry with a dry cloth, do not allow the de greaser to dry on the surface, to remove contaminants effectively the surface must be wiped dry.
After this treatment the surface will be free of contaminants and can be painted with any suitable system.
Cleaning of Equipment
Dispose of waste clothes under the (coshh regulations)
Drying times
30-40 seconds
Reacoatable

Pack Size 1Ltr and 5 Ltr
Points to Note:
Ware Latex Gloves and a carbon filter mask before use!.