Pinstripe Vinyl Bs1 Sideline Gold 10M
Pinstripe Vinyl tape with clear top liner stripe material and a paper backing , automotive sideline application or great for customising you bodywork. Stripes comes in the following sizes , please look at the discription and then find the size in the list below.
Self adhesive , for easy fitting
BS1 3mm wide
BS2 5mm wide
BS3 3mm x 3mm wide
BS4 6mm x 3mm wide
BS10 2mm x 5mm wide
BS18 3mm x 2mm wide
BS27 2mm x 4mm wide
Application of Pinstriping
Prepare the surface of your vehicle before you apply the pinstripe.
Clean your vehicle using car soap and water to ensure dirt and dust doesn’t prevent the vinyl pinstripe from sticking to the surface of Dry your vehicle completely using a dry, clean towel. Wash your hands, removing any oils or dirt, so they don’t prevent the adhesive from forming a strong bond once on the vehicle.
Mark the points on your vehicle where the pinstripe will begin and end using small pieces of masking tape. Place the vinyl pinstripe decal tape at the beginning marker on your vehicle. Peel back the corner of the wax backing paper and stick the pinstripe to your vehicle at the first marker.
Use one hand to pull back the wax backing paper and the other to guide the pinstripe across the to ensure it is applied in a straight line. Apply the pinstripe along the surface of your car in sections to prevent the vinyl pinstripe from stretching.
Align each section of the vinyl pinstripe to continue applying the tape in a straight line. Apply the sections of vinyl pinstripe until you have reached the ending marker. Use your fingers to gently tap on the pinstripe to ensure a strong bond is formed between the vinyl tape and the surface of your car. Remove the clear protective film.