Zinc phosphate Primer Red Oxide Zs8 Aerosol 400 ml

A very fast drying Zinc phosphate Primer Red Oxide Zs8 Aerosol 400 ml for general purpose use, the product protects against the environment with zinc phosphate, for protection of steel parts girders, chassis framework etc.

£11.82

SKU: 202.032.114 Categories: ,

Description

Zp Primer Red Oxide Zs8 Aerosol 400 ml

A Very fast drying single pack primer for general purpose use, the product protects against the environment with zinc phosphate ,Zp Primer Red Oxide Zs8 Aerosol 400 ml is for protection of steel parts girders, chassis framework etc.,.

Colour
Red Oxide

Coverage

A coverage of 4 – 6 sq/mtr per ltr. @ 100 microns wet. Unthinned

Flash point

below 32°c ( Flammable)

Application Substrates

ZP Primer Shades is recommended to be applied over ;

– Well sanded original finishes
– Bare steel
– Wood

Surface preparation

Degreaser with Quick wipe Degreaser.
Dry sand with p180-p240 grade paper.
Wet sand with p400-p600 grade paper.
Heavy coats applied wet on wet should be avoided .
2 coats should be applied allowing flash off times of 30 mins between coats.

Application process

Two coats should be applied allowing flash off times of 30 mins between coats.
A film thickness of up to 100 mircons maybe applied onto vertical surfaces.

Drying
at 20 Degrees C
Touch dry 30 – 40 mins
Hard Dry 2 hrs
A film thickness of 40 microns is average dry.
Storage

12 months for unopened cans.
Ambient temperature for application is above 10°c low humidity /dry conditions.

Recoatability

ZP Primer Shades can be coated up to 1 hr. after application. (Wet on wet ) ,alternatively it must be left to fully dry before coating continues.

Cleaning solvent

Mirror low cost thinner

Points of Note

Additional information

Weight 0.4 kg
Dimensions 70 × 70 × 200 mm