Description
Zp Primer Red Oxide Zs8 Aerosol 400 ml
A Very fast drying single pack primer for general purpose use, the product protects against the environment with zinc phosphate ,Zp Primer Red Oxide Zs8 Aerosol 400 ml is for protection of steel parts girders, chassis framework etc.,.
Colour
Red Oxide
Coverage
A coverage of 4 – 6 sq/mtr per ltr. @ 100 microns wet. Unthinned
Flash point
below 32°c ( Flammable)
Application Substrates
ZP Primer Shades is recommended to be applied over ;
– Well sanded original finishes
– Bare steel
– Wood
Surface preparation
Degreaser with Quick wipe Degreaser.
Dry sand with p180-p240 grade paper.
Wet sand with p400-p600 grade paper.
Heavy coats applied wet on wet should be avoided .
2 coats should be applied allowing flash off times of 30 mins between coats.
Application process
Two coats should be applied allowing flash off times of 30 mins between coats.
A film thickness of up to 100 mircons maybe applied onto vertical surfaces.
Drying
at 20 Degrees C
Touch dry 30 – 40 mins
Hard Dry 2 hrs
A film thickness of 40 microns is average dry.
Storage
12 months for unopened cans.
Ambient temperature for application is above 10°c low humidity /dry conditions.
Recoatability
ZP Primer Shades can be coated up to 1 hr. after application. (Wet on wet ) ,alternatively it must be left to fully dry before coating continues.
Cleaning solvent
Mirror low cost thinner
Points of Note